Light Control Box
Remote control for RGB lights. Electrical overload and leakage protection
Light Control Box
Remote control for RGB lights. Electrical overload and leakage protection
- Share
Previous
Next
WEATHERPROOF FOR OUTDOOR INSTALLATION
The AC power of 600W at maximum feed into the control box is divided into 2 circuits which can each support a load up to 300W. The control for lights on the same line is by nature synchronized and synchronization of control over both lines (all lights) is also possible.
Product Features
- IP44 rating, suitable for outdoor use
- Maximum load of 600W with power indicator
- Made from fire-proof PC material
- Panel control mode and remote control mode
- The hand-held remote control interacts with the control box from a distance
- Simple and easy operation with 4 keys
- 10 effects are all sequentially numbered. The “RESET” key set all lights to the first effect
- “POOL” and “SPA” keys are used to change the lighting effects connected to the pool circuit and the spa circuit respectively
| Key No. | Part No. | Description | Piece(s) Required |
|---|---|---|---|
| 1 | 03011007 | M4*12 Screw | 4 |
| 2 | 04014054 | Light Switch | 1 |
| 3 | 04014090 | Electronic Board (220V 50Hz/60Hz) | 1 |
| 3 | 04014114 | Electronic Board (110V 60Hz) | 1 |
| 4 | 03011196 | M3*6 Screw | 4 |
| 5 | 89480101 | Control Box | 1 |
| 6 | 04014013 | Cable Gland | 3 |
| 7 | 87013019 | Plastic Wall Fitting for Screw | 4 |
| 7 | 03011023 | M5*35 Screw | 4 |
| 8 | 106691486 | Remote Control with Battery | 1 |
| 9 | 01360015 | Panel board | 1 |
